Never again leave home without knowing that your possessions and loved ones are safe. The INSTEON Smoke Bridge monitors First Alert® ONELINK® smoke and carbon monoxide detectors, allowing you to create email and text message alerts that can be sent to you no matter where you are.
Monitor the state of your home and be alerted to smoke, fire and carbon monoxide. When paired with an INSTEON Hub, the Smoke Bridge can send alerts to your smartphone via text or email informing you that something is wrong and giving you the knowledge to act to save your home and family from potential disaster.
• Works with First Alert ONELINK smoke and carbon monoxide detectors
• Enables alerts via text message and email when paired with the INSTEON Hub, ISY994i Controller, HouseLinc software, or other compatible central controller
• Only one Smoke Bridge needed to for an entire house of ONELINK Smoke Detectors
• Receive specific notification in case of smoke, carbon monoxide, low battery, all clear, or error messages with HouseLinc
• Can be linked to lights or other INSTEON devices manually or via software to turn lights on instantly in the event of an alert
It all starts with a First Alert ONELINK Smoke Detector. If one of these detectors senses smoke, fire or carbon monoxide, they sound an audible alarm and send out an RF signal to other ONELINK Smoke Detectors.
Sound the Alarm
The signal propagates throughout your home and activates every First Alert ONELINK Smoke Detector. Before long, every alarm is sounding. But what happens if you're not at home?
The More You Know
The INSTEON Smoke Bridge detects the First Alert ONELINK RF signal and sets into action. Communicating with the INSTEON Hub or any other alert-ready INSTEON central controller, the alarm is sent out as an alert to your smartphone. Simultaneously, Smoke Bridge turns on any linked lights as an additional precaution, making escape at night even safer.
|Product Name:||INSTEON Smoke Bridge|
|Manufacturer Product No.:||2982-222|
|Warranty:||2 years, limited|
|Bridging compatibility:||First Alert® Onelink® Responder|
|Control groups/commands:||Smoke Sensed|
|Carbon Monoxide Sensed|
|Setup LED:||Blinks red or green during setup|
|Commands supported as responder:||Beep||Status|
|First Alert ONELINK RF Range:||Up to 50 feet of a First Alert ONELINK smoke detector|
|INSTEON device category:||0x10|
|INSTEON device subcategory||0x0A|
|Mounting:||Plug-in to polarized Type A socket|
|Enclosure color||INSTEON White|
|Set button:||1 on right side of case|
|Enclosure:||ABS, UV stabilized, gloss finish|
|Beep on button press:||Yes|
|Dimensions:||3.2" H x 2.05" W x 1.05" D|
|Weight:||2.4 oz (0.15 lbs)|
|Operating temperature range:||32° to 104°F|
|Operating humidity range:||0-85% relative humidity|
|Storage temperature range:||-4° to 158°F (-20° to 70°C)|
|Voltage:||120VAC ± 10%|
|Electrical Frequency:||60 Hz|
|Retain all settings without power:||Yes, saved in non-volatile EEPROM|
|Standby power consumption:||0.8 Watts|
|Safety approved:||Conforms to ANSI/UL Std. 508-2008 |
Certified to CAN/CSA Std. C22.2#14-2008
|FCC ID:||FCC ID: SBP2457D2A |
|Smoke Bridge||Quick Start Guide Manual|