Aeotec ZW150 Nano Dimmer Bypass
Need Some Advice? Speak to one of our staff
Stop dimmed lights flickering.
Dimming energy-saving lights is complicated – there’s a lot of different technology built into modern bulbs. That’s why dimmed lights sometimes flicker or remain on – power trickles through. Bypass works with illumino Dimmer Switch, Nano Dimmer, and a range of 3rd party light dimming controllers to remove the signals from your power line that cause low-wattage light bulbs to flicker.
Ideal for bulbs less than 4 watts.
If your light dimming controls low-voltage lighting that uses less than 4 watts, Bypass may be needed. You can wire it into the corresponding wall box or immediately prior to the light bulb or light bank.
There are a lot of different types of low-power light bulbs that your home may have; Bypass has been designed to work with most of them. It’s been designed to stop most bulbs from flickering including static and dimmable LEDs and CFLs.
Bypass invisibly installs near your light fitting taking up next to no space at all.
25 x 10 x 19 mm
(0.98 x 0.39 x 0.75 in)
Made for dimming.
Along with in-wall dimmers and dimming switches from third-party makers, Bypass works with Aeotec’s illumino Dimmer Switch and Nano Dimmer creating a complete Z-Wave solution for dimming lights.